blue uhmwpe sheet :

blue uhmwpe sheet

Polyethylene Characteristics

PE1000 (UHMWPE) black / red / blue / white

PE 1000 is an engineered UHMWPE with a molecular weight of approximately 5 to 10,5 million g/mol. Tivar 1000 is available as compression moulded or ram extruded semi-finished shape in various colours. Fabricated parts and components can be machined out of semi-finished shapes.

PE 1000 Characteristics

Excellent sliding properties

High wear resistance

High impact strength

Very good chemical and corrosion resistance

Good noise absorption

Anti-adhesive

High energy absorption capacity and high stress rates

Temperature resistance from -200°C to +80°C

Physiologically safe

PE 1000 R (UHMWPE) black / various patterns

The properties of UHMWPE allow recycling back into a quality materials cycle. By adding higher quality reprocessed material it is possible to offer an attractive price-to-performance ratio for selected applications. PE1000 with reprocessed content fulfills the requirements profile for a number of applications. Partially reprocessed UHMWPE; much better impact strength and wear resistance compared with virgin PE 500 - economical grade.

PE 1000 R Characteristics

Good sliding properties

Good wear resistance

Good price-to-performance ratio

Black version is anti-static & UV-resistant

PE 1000 ESD anti-static (UHMWPE) black

Anti-static properties of UHMWPE are often required with high line speeds and conveying rates. PE 1000 anti-static meets these requirements. Anti-static properties are achieved by incorporating efficient carbon black types.

PE 1000 ESD Characteristics

Similar to PE1000 but with a surface resistivity of 109Ω

PE 500 (HMWPE) black / red / blue / white

PE 500 is used in the food industry and the leisure industry, but is not recommended where abrasion resistance is required.

PE 300 (HDPE) black / white

PE 300 is used in tank building and container building, but is not recommended where abrasion resistance is required.

PE DrySlide (UHMWPE) black

PE DrySlide is the material with the lowest coefficient of friction within the PE product family,  DrySlide is an engineering polymer based on UHMWPE with built-in lubrication. The lubricant allows an extremely low coefficient of friction independent of loads being applied. In addition, PE DrySlide is provided as anti-static formulation.

PE DrySlide Characteristics

Self-lubricating

Anti-static

Extremely low coefficient of friction

Excellent wear resistance

Long life span

Good chemical and corrosion resistance

High UV-stability

Good noise absorption

No moisture absorption

PE Tech (UHMWPE) black

PE 1000 MoS contains molybdenum disulphide. This solid lubricant reduces frictional resistance. The coefficient of friction decreases with dynamic load. PE1000 MoS is used in applications with higher loads and where dry running is required.

PE Tech Characteristics

Self-lubricating

Very low coefficient of friction

High wear resistance

Long life span

Good chemical and corrosion resistance

High UV-stability

Good noise absorption

No moisture absorption

3000x1250mm

3000x1500mm

6000x1800mm

4500x2000mm

black

 Conveyor wear strips

Guide Rails

Bearings, Bushes

Chute linings

Pipe for distribution of slurry materials

Other components requiring maximum abrasion resistance and impact strength and a low friction coefficient•